Caterpillar WHEEL-TYPE LOADER 988G - catalog of spare parts
Dimensions
Length with bucket on the ground - 0.16 feet
Height to Cab Top - 13.54 Feet in
Wheelbase - 14.93 feet in
Ground clearance - 1.81 feet in
Articulated Finger - Maximum Height - 19.21 Feet
Reach at Max Lift and Dump - 6.19 feet in
Hydraulic cycle time
Rise - 9.4 s
Blade - 2.4 s
Total hydraulic cycle time - 15.6 s
Bottom swimming down - empty - 3.8 s
Choose WHEEL-TYPE LOADER 988G section:
Specifications
engine
Engine Make - Caterpillar
Engine Model - 3456 EUI
Net power - 475 hp
Gross Power - 520 HP
Displacement - 964.2cu in
Barrel diameter - 5.6 inches
6.8 inch travel
Engine Model - Cat 3456 EUI
Operational
Working Weight - 110,634.6 lbs
179.4 gallon fuel tank capacity
Hydraulic Capacity - 124.2 Gallons
Cooling system capacity - 27.3 gallons
Transmission fluid capacity - 18.5 gal
Front Axle / Differential Fluid Volume 49.2 gallons
Rear Axle / Differential Fluid Capacity - 49.2 gallons
Transmission
Transmission Type - Powershift - Planetary
The number of forward gears - 4
Number of reverse gears - 3
Top Speed - Forward - 35.4 mph
Max. Speed - Reverse - 23.5 mph
Forward - 1 - 4.3 mph
Forward - 2 - 7.7 mph
Forward - 3 - 13.7 mph
Forward - 4 - 24 miles per hour
Reverse - 1 - 5 mph
Reverse - 2 - 8.8 mph
Reverse - 3 - 15.6 mph
Steering
Minimum turning radius - above the bucket - 341.3 inches
Buckets
Maximum bucket capacity - 9.2yd3
Hydraulic system
Lifting Time - 9.4sec
Dump time - 2.4 sec.
3.8 s less time
Bucket
Breakout Force - 115866.6 lbs
Discharge clearance at maximum lift - 13.8 feet per
Bucket Width - 12.5 Feet in
Bucket Capacity - Bulk - 8.3yd3
Bucket Capacity - Penetrated - 10.8yd3
Digging Depth - 0.6 Feet in
Rear - Trunnion
Swing angle - 13 degrees
The maximum rise and fall of one wheel - 22.4 inches
Dimensions
Length with a bucket on the ground - 40.2 feet in
Height to Cab Top - 13.6 ft.
Ground clearance - 1.9 feet in
Wheelbase - 15 ft. In
Articulated Finger - Maximum Height - 19.3 ft.
Reach at Max Lift and Dump - 6.2 Feet in
Operational characteristics
Static Tipping Load - Full Turn - 60,386 lbs
Mine clearance - 13.9 feet in
Breakout Force - 123,300 pounds
Joint angle - 43 degrees
Speed - 24.8 mph
Service replenishment options
Cooling system - 27.3 gal
Fuel Tank - 179.4 Gallons
Crankcase Protection - 15.9 gal
Hydraulic system including tank - 124.2 gallons
Transmission - 18.5 gal
Differential - Last gear - Front - 49.2gal
Differential - Last gear - Rear - 49.2gal
Hydraulic system - tank only - 70.6 gal
Dimensions *
Height - Top ROPS / FOPS - 13.6 feet in
Reach the maximum Lift / Dump - Std - 7.1 feet in
Wheelbase - 15 ft. In
Total Length - Standard - 41.6 ft.
Articulated Finger Height - Full - Standard - 19.2 ft.